Custom Molded Parts

Custom sizes and shapes are available. Sizes are shown where specified in the catalogue. Contact our team for other specifications or to discuss your requirements.

Orange molded clip bracket with two upright clips

Twin-Tab Clip Bracket

Part 240120: part reference and catalogue size.
Part No.	Catalogue Size
240120	On request

View catalogue page Request a Quote

Dark molded saddle bracket with an open centre and mounting feet

Saddle Mounting Bracket

Part 240121: part reference and catalogue size.
Part No.	Catalogue Size
240121	On request

View catalogue page Request a Quote

Black angled molded fitting with a cylindrical opening

Angled Tube Socket

Part 240122: part reference and catalogue size.
Part No.	Catalogue Size
240122	On request

View catalogue page Request a Quote

Black molded housing with a white circular end insert

Rectangular Housing with Round Insert

Part 240123: part reference and catalogue size.
Part No.	Catalogue Size
240123	On request

View catalogue page Request a Quote

Grey-green molded arm with a mounting hole and crossbar

Mounting Arm with Crossbar

Part 240124: part reference and catalogue size.
Part No.	Catalogue Size
240124	On request

View catalogue page Request a Quote

Black molded junction bracket with two projecting arms

Two-Pin Corner Bracket

Part 240125: part reference and catalogue size.
Part No.	Catalogue Size
240125	On request

View catalogue page Request a Quote

Orange and pale grey tapered molded sleeves with internal cross supports

Tapered Sleeves with Cross Supports

Part 240086: part reference and catalogue size.
Part No.	Catalogue Size
240086	25 mm

View catalogue page Request a Quote

Dark teal molded curved housing with a large cylindrical opening

Angled Tubular Housing

Part 240126: part reference and catalogue size.
Part No.	Catalogue Size
240126	On request

View catalogue page Request a Quote

Dark teal molded elbow with a ribbed lower collar

Curved Housing with Ribbed Collar

Part 240127: part reference and catalogue size.
Part No.	Catalogue Size
240127	On request

View catalogue page Request a Quote

Red rounded molded component with an opening at the top

Red Spherical Cap

Part 240085: part reference and catalogue size.
Part No.	Catalogue Size
240085	20 mm / 22 mm

View catalogue page Request a Quote

Navy molded cylindrical sleeve with a stepped ribbed upper ring

Stepped Cylindrical Sleeve

Part 240090: part reference and catalogue size.
Part No.	Catalogue Size
240090	38 mm

View catalogue page Request a Quote

Curved Molded Cover

Part 240091: part reference and catalogue size.
Part No.	Catalogue Size
240091	25 mm

View catalogue page Request a Quote

Dark molded curved support with mounting openings

Curved Support Bracket

Part 240092: part reference and catalogue size.
Part No.	Catalogue Size
240092	32 mm

View catalogue page Request a Quote

Blue molded open housing with a rounded end and mounting details

Rounded Channel Housing

Part 240093: part reference and catalogue size.
Part No.	Catalogue Size
240093	25 mm

View catalogue page Request a Quote

Teal molded curved channel with a tall end and raised lines

Raised-End Support Channel

Part 240094: part reference and catalogue size.
Part No.	Catalogue Size
240094	25 mm

View catalogue page Request a Quote

Two views of a blue ribbed cylindrical molded component

Ribbed Cylinder with Centre Insert

Part 240102: part reference and catalogue size.
Part No.	Catalogue Size
240102	58 x 32 mm

View catalogue page Request a Quote

Dark molded circular component with a raised centre hub

Molded Wheel with Raised Hub

Part 240128: part reference and catalogue size.
Part No.	Catalogue Size
240128	On request

View catalogue page Request a Quote

Black molded circular component with internal ribs and a rim notch

Notched Molded Wheel

Part 240129: part reference and catalogue size.
Part No.	Catalogue Size
240129	On request

View catalogue page Request a Quote

Dark green molded circular component with concentric rings

Concentric-Ring Molded Wheel

Part 240130: part reference and catalogue size.
Part No.	Catalogue Size
240130	On request

View catalogue page Request a Quote

Pale lavender molded circular component with a centre opening

Smooth-Face Molded Wheel

Part 240131: part reference and catalogue size.
Part No.	Catalogue Size
240131	On request

View catalogue page Request a Quote

Red and black molded circular component with a central mounting feature

Red and Black Molded Wheel

Part 240132: part reference and catalogue size.
Part No.	Catalogue Size
240132	On request

View catalogue page Request a Quote

Dark rectangular molded insert with an open top slot

Narrow Slotted Rectangular Insert

Part 240097: part reference and catalogue size.
Part No.	Catalogue Size
240097	39 x 18 mm

View catalogue page Request a Quote

Pale grey rectangular molded insert with an open top slot

Wide Slotted Rectangular Insert

Part 240098: part reference and catalogue size.
Part No.	Catalogue Size
240098	60 x 25 mm

View catalogue page Request a Quote

Dark upright rectangular molded block with vertical ribs

Ribbed Rectangular Insert

Part 240099: part reference and catalogue size.
Part No.	Catalogue Size
240099	45 x 25 mm

View catalogue page Request a Quote

Blue-grey molded insert with ribbed sides and a lower flange

Recessed Square Insert with Flange

Part 240100: part reference and catalogue size.
Part No.	Catalogue Size
240100	46 x 42 mm

View catalogue page Request a Quote

Blue-grey square molded insert with a contoured open top

Slotted Square Insert with Side Opening

Part 240101: part reference and catalogue size.
Part No.	Catalogue Size
240101	45 x 40 mm

View catalogue page Request a Quote

Dark molded spool with perforations in its upper circular face

Perforated Molded Spool

Part 240133: part reference and catalogue size.
Part No.	Catalogue Size
240133	On request

View catalogue page Request a Quote

Dark curved molded segment with three recessed mounting holes

Curved Three-Hole Mounting Bracket

Part 240134: part reference and catalogue size.
Part No.	Catalogue Size
240134	On request

View catalogue page Request a Quote

Black curved molded connector with projecting end tongues

Curved Connector with End Tabs

Part 240135: part reference and catalogue size.
Part No.	Catalogue Size
240135	On request

View catalogue page Request a Quote

Grey-green arched molded handle shown in the catalogue with part references 240136 and 240137

Arched Pull Handle

Parts 240136 / 240137: part reference and catalogue size.
Part No.	Catalogue Size
240136	On request
240137	On request

View catalogue page Request a Quote

Black molded bridge handle with downturned end legs

Bridge Pull Handle

Part 240138: part reference and catalogue size.
Part No.	Catalogue Size
240138	On request

View catalogue page Request a Quote

Dark curved ribbed molded handle with hooked mounting ends

Ribbed Strap Handle

Part 240139: part reference and catalogue size.
Part No.	Catalogue Size
240139	On request

View catalogue page Request a Quote

Front Enclosure Shell

Part 240140: part reference and catalogue size.
Part No.	Catalogue Size
240140	On request

View catalogue page Request a Quote

Olive-green rear enclosure shell with a circular grille and recessed compartment

Rear Enclosure Shell with Grille

Part 240141: part reference and catalogue size.
Part No.	Catalogue Size
240141	On request

View catalogue page Request a Quote

Dark cylindrical molded component with a wide circular flange

Flanged Cylindrical Fitting

Part 240142: part reference and catalogue size.
Part No.	Catalogue Size
240142	On request

View catalogue page Request a Quote

Pale ribbed molded sleeve with a wide flange and open centre

Flanged Ribbed Sleeve

Part 240143: part reference and catalogue size.
Part No.	Catalogue Size
240143	On request

View catalogue page Request a Quote

Black and yellow ergonomic molded handle

Two-Tone Tool Handle

Part 240144: part reference and catalogue size.
Part No.	Catalogue Size
240144	On request

View catalogue page Request a Quote

Off-white threaded molded fitting with a hollow neck and square base

Square-Base Threaded Fitting

Part 240145: part reference and catalogue size.
Part No.	Catalogue Size
240145	On request

View catalogue page Request a Quote

Black rectangular molded base plate with an upright mounting boss

Rectangular Base Plate with Mounting Post

Part 240146: part reference and catalogue size.
Part No.	Catalogue Size
240146	On request

View catalogue page Request a Quote

Olive-green molded enclosure with divided openings and mounting tabs

Vented Enclosure Frame

Part 240147: part reference and catalogue size.
Part No.	Catalogue Size
240147	On request

View catalogue page Request a Quote

Olive-grey molded housing with a stepped base and raised mounting features

Stepped Mounting Housing

Part 240148: part reference and catalogue size.
Part No.	Catalogue Size
240148	On request

View catalogue page Request a Quote

Sage-green curved molded component with a circular mounting opening

Curved Panel with Mounting Eye

Part 240149: part reference and catalogue size.
Part No.	Catalogue Size
240149	On request

View catalogue page Request a Quote

Cream elongated molded housing with upright bosses and mounting openings

Elongated Housing with Mounting Bosses

Part 240150: part reference and catalogue size.
Part No.	Catalogue Size
240150	On request

View catalogue page Request a Quote

Twin-Tab Clip Bracket

Saddle Mounting Bracket

Angled Tube Socket

Rectangular Housing with Round Insert

Mounting Arm with Crossbar

Two-Pin Corner Bracket

Tapered Sleeves with Cross Supports

Angled Tubular Housing

Curved Housing with Ribbed Collar

Red Spherical Cap

Stepped Cylindrical Sleeve

Curved Molded Cover

Curved Support Bracket

Rounded Channel Housing

Raised-End Support Channel

Ribbed Cylinder with Centre Insert

Molded Wheel with Raised Hub

Notched Molded Wheel

Concentric-Ring Molded Wheel

Smooth-Face Molded Wheel

Red and Black Molded Wheel

Narrow Slotted Rectangular Insert

Wide Slotted Rectangular Insert

Ribbed Rectangular Insert

Recessed Square Insert with Flange

Slotted Square Insert with Side Opening

Perforated Molded Spool

Curved Three-Hole Mounting Bracket

Curved Connector with End Tabs

Arched Pull Handle

Bridge Pull Handle

Ribbed Strap Handle

Front Enclosure Shell

Rear Enclosure Shell with Grille

Flanged Cylindrical Fitting

Flanged Ribbed Sleeve

Two-Tone Tool Handle

Square-Base Threaded Fitting

Rectangular Base Plate with Mounting Post

Vented Enclosure Frame

Stepped Mounting Housing

Curved Panel with Mounting Eye

Elongated Housing with Mounting Bosses

Request a Quote

Send Us Your Requirements